Skip to main content
Menu
US
US

Bulk Caps, Tubes, & Well-plate Consumables

Plasticware consumables to streamline workflows

Revvity offers consumables such as bulk caps, tubes, and well-plates to help consolidate a lab’s process, including sample prep workflows. Plasticware has been verified to be compatible with standard homogenization workflows using Omni Bead Ruptor bead mill homogenizers and can also be used for general use. Automation-compatible consumables are recommended for use with the Omni automated homogenizers and workstations.


For research use only. Not for use in diagnostic procedures.

Bulk Caps, Tubes, & Well-plate Consumables
snap-cap-tube_empty

Bulk tubes and caps for automation

We recommend automation-compatible tubes be used with our Omni Prep 96 automated homogenizers and Omni LH 96 automated homogenizer workstations. Automation-compatible tubes can also be used for bead milling, manual rotor-stator homogenization, or other general use applications.

Automation compatible tubes with caps
  • 2.0 mL low-binding tubes with screw caps
  • 5.0 mL or 15 mL round bottom tubes with snap caps
  • 30 mL or 50 mL tubes with screw caps

Learn more about our Prep 96 automated homogenizer

We recommend automation-compatible tubes be used with our Omni Prep 96 automated homogenizers and Omni LH 96 automated homogenizer workstations. Automation-compatible tubes can also be used for bead milling, manual rotor-stator homogenization, or other general use applications.

Automation compatible tubes with caps
  • 2.0 mL low-binding tubes with screw caps
  • 5.0 mL or 15 mL round bottom tubes with snap caps
  • 30 mL or 50 mL tubes with screw caps

Learn more about our Prep 96 automated homogenizer

2mL-reinforced-tube-160x160

Empty tubes and caps for handheld rotor-stators and bead mills

We offer additional bulk tubes and caps to the ones' listed above, which are also compatible with general laboratory workflows and protocols. General protocols include rotor-stator homogenization and bead milling with our units and with others.

Learn more about our Omni Bead Ruptor bead mills

We offer additional bulk tubes and caps to the ones' listed above, which are also compatible with general laboratory workflows and protocols. General protocols include rotor-stator homogenization and bead milling with our units and with others.

Learn more about our Omni Bead Ruptor bead mills

96well-plate

96-well format consumables

Well-plates are compatible with the Omni Bead Ruptor 96 well-plate homogenizer with appropriate adapters. Well-strips are not compatible with the Omni Bead Ruptor units.

  • 1.2 mL deep 96-well strips (8-wells per strip)
  • 2 mL deep 96-well plates
  • Sealing mats for 2mL deep 96-well plates

Learn more about our Omni Bead Ruptor 96+ well-plate homogenizer

Well-plates are compatible with the Omni Bead Ruptor 96 well-plate homogenizer with appropriate adapters. Well-strips are not compatible with the Omni Bead Ruptor units.

  • 1.2 mL deep 96-well strips (8-wells per strip)
  • 2 mL deep 96-well plates
  • Sealing mats for 2mL deep 96-well plates

Learn more about our Omni Bead Ruptor 96+ well-plate homogenizer

bg-element-listing-page bg-element-listing-page-mobile
Products & Services
Resource Library
Filters
Expand All|Collapse All
Product Type
Bead Type or Material
Color
Instrument Compatibility
Plate Format
Volume
Well Shape
Sort by: Recommended
Recommended
Product Name A-Z
Product Name Z-A
Price - low to high
Price - high to low
1 - 17 of 17 Products and Services
2 mL Stainless Steel Lysing/Grinding Tubes

The 2 mL Stainless Steel Lysing and Grinding Cryo Tubes provide a solution for processing extremely hard substrates or where a robust tube is required that can be frozen with liquid nitrogen to preserve thermally labile analytes.

Part Number: 19-6001
USD 325.00
5 mL Round Bottom Tubes with Snap Caps

5 mL round bottom tubes with snap caps are manufactured using high quality polypropylene. They provide for a smooth homogenizing process without leaks. They are supplied in packs of 500.

Part Number: 19-6605-500
USD 491.40
1.5 mL Microcentrifuge Tubes

1.5 mL Microcentrifuge tubes feature a retaining cam and wide hinge, they offer a secure and precise seal, and are supplied in 500 or 1000 packs.

Part Number: 19-661, 19-661-1000
USD 402.00 - 493.00
2 mL Tubes with Screw Caps & EPDM O-Rings

2.0 mL Bead Ruptor polypropylene non-reinforced tubes with screw caps and O-Rings. These tubes are supplied in packs of 500.

Part Number: 19-647
USD 461.00
1.2 mL 96 Strip Well Tubes

Empty 1.2 mL strip well tubes. Beads are not included.

Part Number: 19-696
USD 514.50
15 mL Tubes with Screw Caps

15 mL conical bottom screw cap tubes are manufactured using high quality polypropylene. They provide for a smooth homogenizing process without leaks and are supplied in 500 or 1000 packs.

Part Number: 19-6615, 19-6615-500
USD 81.00 - 394.00
50 mL Tubes with Screw Caps

50 mL conical bottom screw cap tubes are manufactured using high quality polypropylene. They provide for a smooth homogenizing process without leaks and are supplied in 100 packs.

Part Number: 19-6650
USD 90.00
14/15 mL Round Bottom Tubes with Snap Caps

14/15 mL round bottom tubes with snap caps are manufactured using high quality polypropylene. They provide for a smooth homogenizing process without leaks. They are supplied in packs of 500.

Part Number: 19-6614-500
USD 309.00
2 mL Reinforced Tubes with Screw Caps & EPDM O-Rings

2.0 mL Bead Ruptor polypropylene reinforced tubes to withstand high impact forces with screw caps and O-Rings. These tubes are supplied in packs of 1000.

Part Number: 19-649
USD 647.00
2 mL 96 Deep Well Plates

Product features: Clear alphanumeric indexing Ultra clear for high visibility HTS friendly with SBS footprint that meets ANSI/SLAS 1-2004 Raised rims on each well facilitate secure sealing with films or sealing mats Autoclavable Note: sealing mats need to be ordered separately.

Part Number: 27-520
USD 245.70
Sealing Mats for 2 mL 96 Deep Well Plates

Sealing mats for 2 mL deep well plates, which cover the surface of the plate, protect contents from leakage and contamination during homogenization. They are suitable for applications at a wide range of temperatures. Pierceable silicone, suitable for heat sealing.

Part Number: 27-530
USD 344.40
2 mL Reinforced Tubes with Screw Caps & EPDM O-Rings

2.0 mL Bead Ruptor polypropylene reinforced tubes to withstand high impact forces with screw caps and O-Rings. These tubes are supplied in packs of 500.

Part Number: 19-648
USD 461.00
19 mL Round Bottom Tubes

19 mL round bottom tubes are manufactured using high quality polypropylene. They provide for a smooth homogenizing process.They are supplied in packs of 100.

Part Number: 19-6619
USD 70.00
30 mL Tubes with Screw Caps

30 mL conical bottom screw cap tubes are manufactured using high quality polypropylene. They provide for a smooth homogenizing process without leaks and are supplied in 100 or 500 packs.

Part Number: 19-6635, 19-6635-500
USD 115.00 - 394.00
7 mL Reinforced Tubes with Screw Caps

7 mL Bead Ruptor polypropylene reinforced tubes with screw caps and O-Rings. These tubes are supplied in 500 or 1000 packs.

Part Number: 19-651-500, 19-651
USD 708.00 - 860.00
2 mL Low Binding Tubes with Screw Caps & Silicone O-Rings

2 mL screw cap low binding micro-tube. polypropylene with skirted base, knurls, printed writing space, and graduation.

Part Number: 19-660-1000
USD 1,057.00
0.5 mL Tubes with Screw Caps & O-Rings

0.5 mL tubes with screw cap and O-Rings are manufactured using high quality polypropylene. They provide for a smooth homogenizing process without leaks. These tubes are supplied in packs of 500.

Part Number: 19-650
USD 370.00
Filters
Expand All|Collapse All
Resource Type
Sort by: Resource Name A-Z
Resource Name A-Z
Resource Name Z-A
1 - 9 of 9 Resources
Application Note
Application Note
High-throughput extraction of cannabinoids from cannabis analog on the Omni Prep 96 automated homogenizer

Cannabinoid quantification is a crucial process in cannabis production and testing, where the quantity of abundant cannabinoids such as THC, CBD, and others are assessed. The most common method involves milling the flower or edibles into homogenous mixtures using an organic solvent for extraction, followed by analysis via HPLC or mass spectrometry. This study evaluated the Omni Prep 96 automated homogenizer’s efficiency for cannabinoid extraction via walk-away rotor-stator technology from a spiked cannabis analog, fresh hops. Results were obtained for CBA and THC recovery rates of the spike standards and compared to recovery by manual mixing only. For research use only. Not for use in diagnostic procedures.

Application Note
Application Note
High-throughput mosquito DNA extraction and PCR analysis on the Omni Bead Ruptor 96 bead mill homogenizer

Field sampling of mosquito followed by sample dissociation and DNA purification is a routine process for research that surveys the spread of vector-borne diseases. Researchers require a fast and repeatable sample preparation technique to rapidly dissociate a large number of mosquitoes while maintaining a high degree of vector and internal pathogen lysis for quantification of pathogen load. As the specimen sizes are relatively small and the number of samples is high, bead beating is an ideal method for high-throughput sample disaggregation. Herein, we demonstrate dissociation of Aedes aegypti using the Omni Bead Ruptor 96 bead mill homogenizer for the dissociation of mosquitos in both well-plates and tube format and assessment of the extracted DNA from homogenates by endpoint PCR.

Application Note
Application Note
Homogenization and downstream analysis of cannabis using the Omni Bead Ruptor 96 bead mill homogenizer

Application note on Bead Ruptor 96 homogenization of hemp flower for cannabinoid analysis using HPLC-UV

Application Note
Application Note
Homogenization of hemp and cannabis flowers using the Omni Bead Ruptor 96 well plate homogenizer

Sample homogenization is essential in preparing hemp and cannabis samples for cannabinoid analysis. 96-well plate homogenization is a quick and robust method that can be optimized for hemp and cannabis, as it allows for simultaneous processing of multiple samples without the need for cleaning between runs. This method also offers benefits compared to traditional homogenizers, significantly reducing solvent use and increasing throughput, making it a reliable choice for particle size reduction in cannabinoid quantification.

Application Note
Application Note
Nucleic acid extraction from Mus musculus tissues using the Omni Bead Ruptor Elite bead mill homogenizer and stainless-steel lysing/grinding tubes

In biomedical research, the ability to reliably extract DNA and RNA from fresh tissue samples is important for molecular applications. It provides an efficient alternative to traditional and manual methods, reducing total processing time and helping with sample-to-sample consistency. We demonstrate the use of the Omni Bead Ruptor Elite™ bead mill homogenizer with stainless-steel lysing/grinding cylinders to yield robust concentrations of DNA and RNA, suitable for downstream molecular applications. The stainless-steel lysing/grinding cylinders are durable and can also facilitate cryogenic sample preparation.

Application Note
Application Note
Quantification of inflammatory cytokines from spleen and liver tissue

Cytokine Release Syndrome (CRS) can lead to significant tissue damage, and it is an active field of immunology research. We outline a workflow for tissue lysate preparation and quantification of 13 key biomarkers relevant to CRS using the LEGENDplex™ panels and the Omni Bead Ruptor Elite homogenizer. The results show that bead mill homogenization is effective in disrupting tissues for cytokine quantification to support research on inflammatory processes.

Application Note
Application Note
RNA extraction from human coronavirus: a comparative study highlighting bead mill vs. manual methods

Reliable extraction of viral RNA from tissue samples is an important step in viral detection for research studies. The Omni Bead Ruptor Elite bead mill homogenizer helps reduce the time needed for initial homogenization steps upstream RNA kit extractions, allowing simultaneous processing of up to 24 samples in 30 seconds in this proof-of-concept study using viral cultures. The protocol using bead mill homogenization upstream of sample vortexing demonstrated increased efficiency over traditional vortexing methods alone. The Omni Bead Ruptor Elite bead mill homogenizer is recommended for its increased throughput, robust RNA yields, and decreased time required for extractions of viral RNA from multiple samples. For research use only. Not for use in diagnostic procedures.

Application Note
Application Note
Simplifying chickpea seed sample homogenization and DNA extraction

Large seeds and nuts can be tough plant matrices resistant to consistent sample prep for downstream analysis; we describe a workflow useing the Omni Bead Ruptor™ 96, which allows for processing in both dry and buffered conditions, leading to high-integrity DNA at robust yields. Automation-enabled bead milling method allows matched throughput and compatibility with automated DNA extraction via the chemagic™ 360, offering a high-throughput solution that can significantly reduce labor-intensive, manual steps in the workflow. The approach utilizing sealed vessels rather than open tubes minimizes potential cross-contamination; hence, protocols described in this application note provides a consistent and efficient solution for downstream DNA-based applications, such as qPCR.

Application Note
Application Note
Total protein quantification from murine teeth using the Omni Bead Ruptor 96 homogenizer

Teeth are valuable sample types for insights in gene ontology, as well as applications in enamel analysis or downstream proteomics. A bead mill homogenizer, in conjunction with durable steel grinding tubes, facilitate the workflow compared to traditional and often laborious lysis methods for hard and tough samples. Results from murine teeth homogenization is presented as a measure of total protein extraction, along with the recommended instrument settings on the Omni Bead Ruptor 96 bead mill homogenizer using 2 mL Stainless Steel Lysing/Grinding Cryo tubes. Importantly, the use of an automation-enabled tabletop homogenizer helps lab’s scale their throughput and obtain consistency in homogenates from tough tissues.

Questions?
We're here to help.

Contact us